Add a defined carbon-fiber edge to the updated Model 3 rear profile. The spoiler follows the Highland trunk lid and installs with double-sided automotive adhesive—no drilling into the vehicle.
Model 3 Highland only
Matte, glossy or forged
Adhesive installation
Why owners choose it
The difference is visible before the car moves.
Spoiler buyers consistently focus on three things: the installed silhouette, the fit along the trunk edge and an installation that stays aligned. This design makes those decision points easy to evaluate.
01 — PROFILE
A defined rear edge
The raised outer tips and continuous center section add a more purposeful line without covering the rear lamps or badge area.
02 — MATERIAL
Carbon fiber, not a printed look
The current product specification identifies dry carbon fiber, with woven matte, woven glossy and forged-pattern variants.
03 — INSTALL
No drilling required
The spoiler mounts to the painted trunk surface with double-sided automotive adhesive after cleaning, dry fitting and careful alignment.
Check fitment first
Designed for the updated Model 3 Highland trunk.
Compatible: Tesla Model 3 Highland, introduced from October 2023 and commonly sold as model year 2024+ depending on market.
Not compatible: pre-Highland Model 3 vehicles with the 2017–2023 body, Model Y, Model S or Model X.
Registration year alone can be misleading around a vehicle update. Confirm that your car is the Highland generation and compare the trunk-lid shape with the installed photos before ordering.
Choose the finish
One profile, three carbon-fiber characters.
Choose the surface treatment that best matches the other exterior trim on your vehicle.
Matte woven
Low-reflection finish
A subdued woven appearance that pairs naturally with satin and matte exterior accents.
Glossy woven
High-contrast weave
A reflective clear-coated surface that makes the woven carbon pattern more prominent.
Forged pattern
Irregular carbon texture
A non-woven, flake-style visual pattern for owners who want a more distinctive finish.
Proof you can inspect
Judge the product by fit, finish and the installed profile.
Vehicle photos show the spoiler spanning the Highland trunk edge.
Product photos expose the carbon surface and the raised outer tips.
Three sellable variants match the matte, glossy and forged choices shown above.
Installation uses adhesive tape rather than drilled holes or permanent fasteners.
Product facts
What arrives and what it requires.
In the package
1 × Model 3 Highland rear trunk spoiler Double-sided automotive adhesive tape set
Tesla Model 3 Highland, 2023.10–present. Verify generation and trunk shape rather than registration year alone.
Installation type
Surface-mounted with double-sided automotive adhesive. No drilling is required.
Installation
Dry fit first. Clean carefully. Press once.
Test the positionKeep the adhesive liner on and place the spoiler against the trunk to confirm fit and orientation.
Clean and dryRemove wax, dust and oil from the bonding area. The painted surface must be completely dry.
Mark the centerUse removable painter's tape to mark the spoiler center and both end positions.
Apply and pressPeel the liner gradually, align to the marks and apply firm, even pressure across the full bonding area.
Allow the bond to setKeep the area dry and avoid pulling on the spoiler for 48 hours after installation.
Important: Adhesive performance depends on surface preparation, temperature and alignment. Do not peel the liner until fitment has been confirmed.
Before you order
Model 3 Highland spoiler FAQ
Will this fit a 2017–2023 Model 3?
No. It is shaped for the updated Model 3 Highland trunk introduced from late 2023. Choose a spoiler specifically listed for the pre-Highland body.
Do I need to drill the trunk lid?
No. This spoiler uses double-sided automotive adhesive. Dry fit, cleaning and accurate alignment are essential before the tape liner is removed.
What is the difference between the three variants?
Matte and glossy versions show a woven carbon pattern with different surface reflections. The forged version has a more irregular, flake-style carbon appearance.
How long should the adhesive set?
After applying firm pressure across the full bonding surface, keep the installation dry and avoid pulling on the spoiler for 48 hours.
What should I check before removing the adhesive liner?
Confirm the vehicle is a Model 3 Highland, compare the trunk shape with the gallery and dry fit the spoiler to verify its center and end positions.
Can I return an unused spoiler?
Return eligibility is governed by Tesery's current refund policy. Review the latest policy before removing protective films or adhesive liners.
Choose the carbon finish that matches your Model 3 Highland.
Matte woven, glossy woven or forged-pattern carbon fiber.
If you qualify for sales tax exemption, please submit your exemption details and supporting documents. Our team will review your request, and once approved, your account will be updated to receive tax-exempt checkout on eligible purchases.
