TESERY 18" /19" Caliper Covers for Tesla Model 3 / Model 3 Highland
R 1,595.00
Sale price R 1,595.00Regular price R 2,972.00
Shipping calculated at checkout
Model 3 · 18/19-inch OEM wheels
Big-caliper color without replacing the braking system.
Four 6061-T6 aluminum covers mount over compatible non-Performance factory calipers for a fuller wheel-well appearance and an easier-to-clean outer surface.
Four-cover set
6061-T6 aluminum
Color choice
Model-specific hardware
Critical Highland selection
Model 3 Highland has two rear-caliper architectures in North America.
Do not choose Old or New Version from model year alone. Compare the vehicle’s rear caliper shape with the reference image before selecting a color.
Use the physical rear-caliper geometry as the deciding evidence. Photograph both rear sides if needed before ordering.
Wrong-version hardware must not be forced.
If the cover, clips or fasteners do not seat exactly as shown for the selected caliper, stop. Do not bend brake lines, contact the rotor or improvise a retention point.
Live fitment matrix
Non-Performance brakes with compatible 18- or 19-inch OEM wheels only.
Vehicle / brake
Fitment
Selector choice
Model 3 Highland · 2024+ · New rear caliper
Compatible
Select Highland “New Version”.
Model 3 Highland · 2024+ · Old rear caliper
Compatible
Select Highland “Old Version”.
Model 3 · 2017–2023 · non-Performance
Compatible
Select “Model 3 2017–2023”.
Model 3 Performance
Not compatible
Factory Performance brake/caliper geometry is excluded.
Aftermarket wheels or spacers
Measure first
Wheel diameter alone does not prove spoke-to-cover clearance.
18/19 inches is only one check.
Confirm wheel-spoke clearance, caliper type and brake-hose/bleeder clearance. Wheel design, offset and inside-spoke profile can change available space.
Appearance, not a brake upgrade
The factory caliper, pads, rotor and hydraulic system remain unchanged.
These are cosmetic covers. They can shield part of the visible caliper from surface dirt and make the outer face easier to wipe, but they do not increase clamping force, shorten stopping distance or replace brake maintenance.
No performance claim
Do not use caliper covers to address brake noise, wear, overheating, fluid leaks or warning messages. Diagnose brake issues before adding any accessory.
Installation decision
Watch first. Self-install only if every brake-area step is familiar.
Wheel removal and clearance verification are required. A qualified installer is recommended; experienced owners may review the resources below and assess whether they can complete the work safely.
Third-party owner video
Real-world installation demo
Independent content by Chrystal Christie; use as experience evidence, not official service instructions.
TESERY installation guide
Step-by-step sequence
Review fastening and clearance checks, then match them to the selected Model 3 version.
Third-party review · Spanish
Highland full installation
Independent content by Dos y un Tesla, useful for understanding the physical work involved.
Before driving
With the vehicle safely supported, rotate each wheel by hand and inspect 360° spoke clearance. Confirm no contact with rotor, hose, bleeder, valve stem or suspension; retorque wheel fasteners to Tesla’s specification and recheck cover hardware after the first drive.
Package contents
One vehicle set, with two lettering colors.
4 × aluminum caliper covers (2 front, 2 rear)
4 × white “TESLA” lettering stickers
4 × black “TESLA” lettering stickers
Installation clips, screws and tools for the selected version
Before you order
Model 3 caliper-cover FAQ
How do I choose Highland Old or New Version?
Compare the physical rear-caliper shape with the supplied reference image. Model year or country alone is not sufficient.
Does it fit Model 3 Performance?
No. The listing explicitly excludes Model 3 Performance brake hardware.
Will the covers improve braking or cooling?
No performance improvement is claimed. They are exterior covers fitted over compatible factory calipers.
Can I install them myself?
Experienced owners may review the videos and assess the work, but professional installation is recommended if wheel removal, brake-area clearance or hardware retention is unfamiliar.
What should I know about returns?
Identify the caliper version and dry-check every cover before applying lettering or road use. Installed, scratched or modified parts may not qualify; review the current refund policy.
Brake type → wheel clearance → color
Choose the physical caliper architecture before choosing the finish.
If you qualify for sales tax exemption, please submit your exemption details and supporting documents. Our team will review your request, and once approved, your account will be updated to receive tax-exempt checkout on eligible purchases.
